On Everything We Carry
|
|
|
On Everything We Carry |
1-800-997-7907 |
Home | Store Info | Email Us | Site Map | FAQ | Shipping | Ebay Auctions | What's New |
| Menu | ||||||||||||
|
| 
Kustom KBA210C200 Watt Bass Combo Amp2x10 Eminence Speakers $459.99 |
(KBA115C & KBA210C) |
| The Kustom KBA210C Bass Combo Amplifier features a fan-cooled, 200-watt RMS amplifier. Fan-Cooling not only protects the amplifier components over time but also permits lighter overall chassis design. The KBA 210C provides a single-wall cabinet that is loaded with two 10-inch speakers that are built by Eminence in the USA. A true Compression Driver handles the high-end work with precision and clarity. The cabinet is constructed with a professional, shelf-style port on the front and large, egg shell-style Kustom carrying handles. Features include a 6-Band Active EQ, Preamp Gain and Volume controls, a built-in Limiter, an External Speaker jack, an Effects Loop with Send and Return jacks and a Line Out to send the amp’s signal to mixers or recording equipment. |
|
|
|
1) Direct Output - this is a 3 conductor XLR output jack for plugging into Lo-Z microphone inputs as found on PA or recording mixers. It is intended to be used in place or external mics or used as a built in direct box. 2) CD/Tape Input - this 1/4" 3 conductor jack will allow you to plug in a CD player, tape or any other source to practice along with. It sums the left and right signals into a mono signal. To control the volume of the source, adjust the output volume of the device. 3) Bass Input - this is a 1/4" 2 conductor input jack for plugging in your instrument. It is intended for bass guitar or Hi-Z microphones but will accept other instruments as well. 4) Gain - adjust this clockwise to match the output level of your bass to the preamp input. If your overload LED lights up, you should lower the gain and increase the volume level for the cleanest possible sound. 5) Overload / Clip LED - This will indicate an overload on the preamp. 6) Volume - This is the Volume control of the amp. It works in conjunction with the gain control. 7) Notch - this control is a dramatic cut filter. It is "Notched" at a rate of -15db. The width of the notch is set at one octave and can be swept from 45 Hz to 1KHz. It will create a very precise subtraction of undesirable overtones or allow you to fine tune your tone settings. 8) Equalizer Section These are all active with a center detent which is equivilant of bypass for that band. Turning it fully clockwise, the signal is boosted 12db. Turning it counterclockwise, it will be rolled off -12db
9) Jewel Light - this Jewel Light lets you know the Amp is on. 10) Power - this switch turns on and off the AC power to the amp. |
(800) 997-7907 |
){kind=link}
){kind=link}
){kind=link}
){kind=link}
){kind=link}